| Customization: | Available |
|---|---|
| After-sales Service: | Ultrasonic Cleaning Machine |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PCB Cleaner Printed Circuit Board Cleaning Ultrasonic Machine
How to use an ultrasonic cleaning to restore electronic and PCBs
Dust, dirty and corrosion can impact the performance of printed circuit boards (PCBs) used in electronic equipment exemplified by sophisticated hand-held devices such as iphones, some of which have been accidently dunked, can be restored, KEEPLEADER is suggesting to use ultrasonic cleaning along with ultrasonic cleaning solution expecially formulated for delicate electronics
Selecting an ultrasonic cleaning machine
Ultrasonic cleaning machine, such as the tabletop, stationary series are ideal for small volume user in cleaning or used as household device, KEEPLEADER can make to size and make customized function, e.g: heating power, timer, counter, temp display, resetting, cycling and filtering mounted and etc, the multistage ultrasonic cleaning machine is recommended for big factory, manufacturer. For them, KEEPLEADER will consider the automatic loading, unloading and transmit among cleaning process, as well as drying system, water purification auxiliary
How to select and use the cleaning solution
The wrong cleaning solution, just as the wrong ultrasonic cleaning frequency, can do more harm that good, an ultrasonic cleaning solution ideal for glass and ceramic substrates, optics, PCBs plastic parts is the biodegradable concentrate detergent, is removes grease, oil, activated fluxes, dust, fingerprints, light corrosion and residues from coffee, tea, colars, milk and other sources
Depending on the extent of contamination this concentrate is diluted 3% to 10% with water, the recommended ultrasonic cleaning time is 3 to 10 minutes at approximately 65C/150F, after cleaning the parts, must be rinsed in distilled or deionized water, this is very important in order to remove any traces of cleaning solution residue, because tap water also will leave residue deposit, it must not be used as a rinse, dry the components thoroughly before reassembly
Note, that these are only guidelines of KEEPLEADER, the user should consult with the ultrasonic cleaning professionals at KEEPLEADER regarding equipment, solution and procedures to meet your requirements
Other suggestion from KEEPLEADER
A fresh batch of ultrasonic cleaning solution contains entrapped air, you can see evidence of this by the bubbles that appear on the inside of a glass of water standing at room temperature, this air interferes with the cavitation process and must be driven off before you begin the cleaning operation to do under steps;
01: add water and correct portion of cleaning concentrate to the tank's fill line
02: set the temperature dial
03: turn on the ultrasonic cleaning to start the degassing operation
The rising temperature coupled with the cleaning chemicals and ultrasonic energy will speed the degassing operation and at the same time thoroughly mix the contents of tank, when air bubbles not longer rise to the surface, you are ready to clean the parts, place them in the mesh basket, taking care to keep them from contacting each other, lower the basket into the basket into the cleaning solution and set the timer, as you become experienced with ultrasonic cleaning PCBs and other electronic components, you will become more proficient and efficient, the engineer at KEEPLEADER are ready to help you reach this goal by selecting the ultrasonic cleaning model, frequency, power, cleaning solution, cleaning process that meets your requirements
01: Choose your correct system
For more of PCB Cleaner Printed Circuit Board Cleaning Ultrasonic Machine,
){kind=link}