| Customization: | Available |
|---|---|
| Control: | Semi-Automatic |
| Cooling Way: | Air Cooling |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Aluminum_Copper Foil Welding Ultrasonic Metal Welder
01: Application
Aluminum_Copper Foil Welding Ultrasonic Metal Welder is designed for lithium battery tab welding with touch-screen controller, it is designed for welding stacked electrode sheets of copper and aluminum and tab onto current collectors to prepare Li-ion pouch cells,Aluminum_Copper Foil Welding Ultrasonic Metal Welder of 3600w can can weld stacked electrode with 60~70 layers of aluminum and copper foils, is also can applied for wire bonding, bonding scopes of rope stranded wire with flat cable welding; rotor and rectifier welding; rare metal electrical connector welding; large-scale wires and terminals welding; copper terminals with beryllium copper alloy welding; electromagnetic wire terminal welding; brush braided copper wire and primary power cable welding; multiple-wire ends welding; rope stranded wire with terminals welding; contact assembly welding; rope stranded copper wire with beryllium copper terminals welding; motor lead wire terminal welding; wire terminals and terminals welding; thick copper sheet with aluminum plate welding; braided line terminal and the motor brushes welding; battery connection welding, nickel-plated lead wire and platinum lead wire welding; small metal piece with metal mesh, metal foil welding, solid copper conductor with brass terminal welding; braided copper wire with brass terminal welding, welding of electrotype-brush holder components
02: Parameter
|
Name |
Aluminum_Copper Foil Welding Ultrasonic Metal Welder |
|
Model |
KLM-20KHZ |
|
Ultrasonic Power |
2000w~5000w |
|
Ultrasonic frequency |
20khz |
|
Source Voltage |
AC 110V/220V+10%V, 50/60Hz |
|
Welding Thickness |
0.03~5mm Al and Ni Tab welding Aluminum/Copper Foil |
|
Welding Size |
5*5mm up to 50mm |
|
Pneumatic pressure |
0.3~0.6Mpa |
|
Stroke Distance |
15mm |
|
Power Regulation Mode |
Frequency Auto-tracking, power adjustable 0~100% |
|
Freq tracking range |
Equal or less 5Hz |
|
Power Stability |
Equal or less 5% |
|
Terminal dynamic response time |
Equal or less 10ms |
|
Over-current Protection Current |
10A |
|
Over-current Protection Time |
Equal or less 10ms |
|
Over-Heat Protection Temp |
85 degree |
|
Working Temp |
+5~50 degree |
|
Amplitude adjustment |
Variable (30%`100%,1% step) |
|
Control Mode |
Time/Depth/Height/Energy |
|
Monitor Mode |
Time/Depth/Height/Energy |
|
Size |
Ultrasonic generator: 420*380*200mm |
|
Welding Head: 510*280*210mm |
|
|
Amplitude of vibration |
15~25um |
|
Weight |
68kgs |
03: Character
No special surface treatment required
Using the reliable piezoelectric ceramic transducer
Man-machine interface control, multiple-parameter storage
The welding time is short, without any flux, gas and solder
No welding sparks, environmental protection and safety
Compacted structure,space saving, easy to introduce automation
Compacted structure,space saving, easy to introduce automation
Energy detection mode, to ensure consistency of welding quality
Welding material does not melt, non-fragile metal properties
Then after the good conductivity and resistance very low or almost zero
Using phase-locked PLL frequency automatic tracking technology, without FM
Pairs of welding metal surfaces that require low, oxidation or plating can be welded
Step-less adjustment of the amplitude without the need for frequency replacement amplifier
Reduces damage and provides efficient energy use because of low welding temperatures (less than approx 50% of the melting point)
Suitable for connection of thin metal foil such as aluminum foil or thin copper foil, also suitable for connection of copper and aluminum wires
Aluminum_Copper Foil Welding Ultrasonic Metal Welder is solid state bonding of precision metal parts by ultrasonic vibration scrubbing moleculer inter-mingle coalescence as a disructive metal bonding technology comparing with convertional laser welding, resistance welding, soldering and pulse welding
High frequency asked question
01: How Does Aluminum_Copper Foil Welding Ultrasonic Metal Welder work?
Aluminum or copper foil to be joined are hold together between the ultrasonic horn and anvil, they experience ultrasonic vibrations of 20khz to 40khz depends upon application, 40khz is precision bonding of two layers of copper foil as better choose, vibration of the horn causes the aluminum or copper foil to scrub together (in shear) that remove surface contaminants to expose bare metal areas, the material's atomic structures then co-mingle to create a strong, surface molecular, solid-state bond that is clean and has low electric resistance, these properties together make the process idea for electronic application and more, the most popular is electric wire bonding and battery anode and cathode multiple-layers Al and Cu Foil stack bonding
02: What strength is expected from materials joined ultrasonically?
Usually, the bond created is as strong or stronger than the parent material, for aluminum and copper foil seam sealing can have hermetic sealing effect
03: What metals can be joined ultrasonically?
Generally, non-ferrous metals: aluminum, silver, gold, copper, brass, nickel and alloys of these materials, applications include battery foil/tab welding, wire splicing, wire termination, spot welding, seam welding and copper tube sealing for the refrigeration industry
04: What about steel components?
Welding to iron, steel and stainless steel is not recommended because they are harder that non-ferrous metals, the surface structure are too dense and do not allow the transfer of the materials for consistent bonding, the parameters required would be more aggressive with heat build-up, resulting in increased tool wear, while bonding may occur, consistent weld strength is difficult to achieve
05: What about dissimilar materials such as aluminum to copper?
Aluminum_Copper Foil Welding Ultrasonic Metal Welder works well for dissimilar materials because the process is the same whether the materials are similar or not, examples include battery nickel, copper tab, aluminum foil welding, copper foil welding, silver-plated or copper stranded wire to nickel-plated copper or brass terminals, copper pads to aluminum heat sinks, and precious metal contacts to contact arms among others
06: What about plated parts?
It depends upon the plating, tin plating inhibits the bonding process, acting more like a lubricant, the tin heats up and may actually reflow, the parts slide over each other rather than rubbing against each other, heat builds up which has a negative effect, especially on wire strands, as they become brittle and usually break, silver and gold plating is different, these are mot compatible because they seem to move away from the weld surface or are able to be scrubbed through to get to the base metal, applications with these plating include stranded wire splicing and tipping, wire termination to plated terminals or lead frames
07: What are weld size and material thickness restrictions?
6mm square wire cross sectional bonding for 40khz and 20khz, bigger size must select 20khz, the material can be of any thickness on the anvil side of the weld as long as it can be held stationary either on the anvil or be clamping, on the horn side, material can be up to 3mm provided sufficient power is available from the controller
08: Can tooling be reworked for extended use?
Many times a horn or replaceable tip can be reworked (build-in the new knurling) one time, more if the rework allows the tool to remain to print or weight specification, stick anvils can build-in new knurling pattern as long as they can still be clamped in position in the tool support or clamping and hold the part as required or bear the shearing force during vibration scrubbing
09: Can the same tooling be used for different applications?
Most tooling is custom make for specific application, especially the fixture, the knurl patterns on the horn and anvil are specified according to material thickness and weld area requirements as well as part configuration, some tooling combination may be used for situation other than the original application, but may need modification
10: How much training necessitate operating a new machine?
Aluminum_Copper Foil Welding Ultrasonic Metal Welder is very easy to operate and do not require any certification, keepleader provides training when installing the machine, and application, training includes operations of the controls, how and when to change tooling, parameter setting and place multiple application setups in the present menu if needed
KEEPLEADER offers free sample welding service and tech consultation performed by experienced, precision weld engineers so the customer can verify the performance of the Aluminum_Copper Foil Welding Ultrasonic Metal Welder applied to their own sample, please fee free to apply for this service
){kind=link}