| Customization: | Available |
|---|---|
| After-sales Service: | Electronic Parts Cleaning Ultrasonic Cleaner |
| Warranty: | 1 Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Electronic Parts Cleaning Ultrasonic Cleaner is dual tanks, automatic lifting and filtering circulation cleaning machine
Electronic Parts Cleaning Ultrasonic Cleaner
MACHINE INTRODUCTION
01:Introduction of Up and Down Agitating Ultrasonic Cleaning Machine with Filter Circulation
Electronic Parts Cleaning Ultrasonic Cleaner is using cavitations, acceleration, straight slow caused by ultrasonic applied to remove the dirty, residue and any contamination in dispersing, emulsifying, stripping force, equipped auto lifting can complete automatic loading and unloading cleaning parts, the slow pulling force can form a taking force to remove the detailed contamination from the cleaning parts easily, circulation and filtering system is another consideration in saving water consumption, avoiding secondary contamination
02: Application
Applied in the cleaning of semiconductor, silicon wafer, watch & clock parts, machine parts, engine parts, Filters, Jewelry, Glass, kitchenware, optical glass, electronics any other solid parts
03: Character:
Ultrasonic cleaning, auto lifting, slow pulling, circulation and filtering in one machine
Vibrators pack mounted at sides, or bottom
All is made of stainless steel, anti-corrosion, long-life span
Thermo-stat, digital display, and PLC operation interface
Ultrasonic intension can tune
Digital analog in matching, frequency seeping, intelligent ultrasonic generator
There is overflow slot at the tank top to avoid overflowing
Build-in input and output water valve, made of SUS304
Outside of cleaning tank is insulation treated
04: Cleaning procedures
Loading-cleaning basket immersing-ultrasonic cleaning/ cleaning basket auto up and down agitating-cleaning basket up-unloading
05: Main parameter
|
Model |
KLE-1048RL |
|
|
Ultrasonic power |
2400w |
|
|
Ultrasonic frequency |
28khz/40khz |
|
|
Heating power |
6kw |
|
|
Pressure pump power |
2pcs*400w=800w |
|
|
Driven motor |
400w~800w |
|
|
Maximum Lifting weight |
500kgs |
|
|
Auto lifting |
15~20pcs / minute |
|
|
Material |
Cleaning tank |
SUS304,2B, T2.0mm |
|
Outside tank |
SUS304,2B, T1.5mm |
|
|
Vibrators pack |
SUS316, T2.5mm |
|
|
Frame |
SIS202,T2.0mm, 60*40mm |
|
|
Cleaning tank |
two tanks of each size: 470*570*460mm |
|
|
Overall size |
1400*1400*1600mm |
|
|
Power |
380v/50hz, 3 phase, 5 wires |
|
|
Total power |
9600kw |
|
|
Net weight |
500kgs |
|
|
Gross Weight |
600kgs |
|
For Electronic Parts Cleaning Ultrasonic Cleaner, pls advise us keepleader
01: inner size of cleaning basket you want or you have
02: if you need up and down agitation?
03: if you need filter circulation
05: Maximum lifting weight
Electronic Parts Cleaning Ultrasonic Cleaner
What should be considered for ultrasonic cleaning machine in choosing?
01: The material of cleaning parts:
for the metal parts in cleaning, we need to classify iron, steel, stainless steel by its intensity, Chemical character, for the wooden, glass, optical glass, rubber, plastic and any other non-metal cleaning parts, their cleaning processes have big difference, So, their cleaning craft, cleaning procedures, cleaning solvent are all in need of pre-consideration
02: Surface condition of cleaning parts
Smooth surface have different cleaning method with rough cleaning surface, the cleaning effect also influenced, so, we need to consider the surface condition of cleaning parts in the cleaning procedures and method
03: Contamination status
The contamination of cleaning parts decide the cleaning solution, we usually calcify them into dust, oil, oxide, finger printer, Wax, and etc, the user should advise us all this information to manufacturer and chemical supply to get professional support, for example: for kitchenware in cleaning, the European countries always contaminate by animal fat, but, for Asian Countries the contamination in their kitchenware are often oil, starch, so, the cleaning method and solution have big difference
04: Cleaning effect in requirements
In cleaning effect, common metal parts and high precision electronic, surface rough treatment and precision machine are all have different requirements, so the cleaning method will be different, but, for the high demanded cleaning effect, the cleaning cost will be increased caused by its cleaning procedure and cleaning solution, this will be another consideration to balance every aspects
05: cleaning machine is its adopting
For multiple cleaning tanks, automatic transmitting, loading, unloading, auxiliary unit and etc are all have cost, so, the user should consider their budget on their cleaning process
06: Safety in choosing ultrasonic cleaning solution
The character of cleaning solution has big different, for ultrasonic cleaning , the solution must be water-based, nonflammable, skin friendly, non-toxic, also need to consider how to handle with the waste liquid, and local government's rule in water recovery and recycle
07: Cleaning efficiency
The most important factor in choosing ultrasonic cleaning machine is hot to improve the cleaning effect, simple immersing can remove the contamination of metal parts, but, spend long time in emulsifying and dispersing, if the machine has lifting, and spinning function, will take the off-contamination away easily, if th machine have ultrasonic, the cleaning efficiency will be improved a lot, we also can build in circulation and filtering system, high pressure water spaying, hot air drying, automatic transmitting, loading, unloading, vacuum suction and etc
08: How to save the cost?
The user always can take some cleaning procedures before machine cleaning, example, can immerse the cleaning parts in advance, spay ultrasonic solution to emulsify and soft the contamination, consider manual cleaning and etc, that's to say, if we adopt hand cleaning for heavy oil and hard contamination, and apply precision cleaning by ultrasonic cleaning machine, can save the cost
09: Automatic cleaning
Open style, single robot arm transmitting are always adopted for 5 cleaning tank or less, three minutes cleaning time or less, loading 100kgs or less, for mass cleaning, and heavy contamination, we should consider multiple cleaning tanks, and multiple robot arm transmitting, belt transmitting
For light contamination, low demand cleaning effect, and mass cleaning volume, we can use hanging and belt transmitting
){kind=link}